| Stock
# |
Description |
Item |
Qty |
| PS-20-12 |
20 Amp 12 Volt power supply
for large scale railroads. Use this power supply with either the
Digitrax DCS-200 8 amp command station or the DB-200 8 amp power booster.
In addition this power supply can supply power for 4 5 Amp Digitrax
Boosters or Command Stations |
 |
MSRP $179.99
Your Price $145
|
| PS-515
5 Amp Power Supply
|
Fully Assembled and Ready to
Run. Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 5 Amps, 75VA.
Attach the two output leads to your DCC Booster or other device that
accepts up to 5amps 15V AC. |
 |
MSRP $49.95
Your Price $40
|
| PS-12 |
12 Volt wall power supply
suitable for the Digitrax Block Detector (BDL-16), Digitrax Power
Management System (PM-4) or Loco-Net. |
 |
MSRP $8.50
Your Price $6.80
|
| PS-315
Power Supply (For Zephyr) |
Fully Assembled and Ready to
Run. Class 2 SELV, Input: AC120V 60Hz, Output: 15 VAC, 3 Amps, 75VA.
Attach the two output leads to your DCC Booster or other device that
accepts up to 3amps 15V AC. |
|
MSRP $29.95
Your Price $24
|
| PM-42 |
This device can
be used on any DCC System. PM42 Quad Power Manager lets you
use a single booster and divide it's output into 4 sections for automatic
reversing &/or to improve operation by preventing the large sections
of your layout from stopping when a short circuit occurs. |
 |
MSRP $79.95
Your Price $64
|
| PSX-1 |
This device can
be used on any DCC System. The PSX-1 is a SINGLE power zone
circuit breaker. |
 |
MSRP $39.95
Your Price $34.95
|
| PM42
Upgrade |
You can now upgrade
your PM-4 to a PM-42 with this upgrade chip replacement. The PM42
gives you 2 additional faster short circuit detection sensitivity
settings. |
|
MSRP $9.99
Your Price $8
|
| EB3 |
Power Distribution
System for 3 power zones. This unit will provide short circuit
detection. |
 |
MSRP $54.95
Your Price $44
|
| AR-1 |
The AR-1 Auto Reverse unit will
control one reverse loop on your railroad allowing your train to turn back
on itself with out you doing anything. |
 |
MSRP $29.99
Your Price $24
|
