Designed for Atlas GP split frame
locomotives. Simply remove the lamp boards and replace them with the
CN-GP
$38.95
$31
$30
CN
Designed for Kato, Life Like and other
split frame locomotives.
$38.95
$31
$30
MP15N
Designed for the Atlas MP15 Switch Engine
$36.95
$30
$28
VO-1000
Designed for the Atlas VO-1000 Switch Engine
$36.95
$30
$28
AMD-1
1 amp N-Scale Plug & Play for Atlas Locomotives
$36.95
$30
$28
M1
Z, N or HO 1 amp,
2 Functions
$31.45
$25
$24
M1-P
Z, N or HO 1 amp,
2 Functions with NMRA
Plug
$36.45
$29
$28
MC2
Z, N or HO 1 amp, 2 Functions
with wireharness plug.
$29.65
$24
$23
DZ-125
Z - N - HO 1
Amp, 2 Functions
Size .478 x .363 x .123
$24.99
$20
$19
DZ-125PS
Z - N - HO 1
Amp, 2 Functions with NMRA Plug
Size .478 x .363 x .123
$26.99
$22
$21
DZ-125IN
Z - N - HO 1
Amp, 2 Functions
Size .478 x .363 x .123
$26.99
$22
$21
DZ-123MO
Z - N
1
Amp, 2 Functions designed for MicroTrains Z-Scale GP-35
$34.99
$28
$26
DZ-143
Z - N - HO 1
Amp, 3 Functions, Transponding, Back EMF
$34.99
$28
$26
DZ-143PS
Z - N - HO 1
Amp, 3 Functions, Transponding, Back E.M.F.
$37.95
$30
$29
DN-123K3
N-Scale
Decoder for Kato NW2
$29.99
$24
$23
DN-143IP
N - HO 1 Amp,
2 Functions
$29.99
$24
$23
DN-163
1
Amp, 6 Functions-FX-3, Transponding, Back EMF. Torque Compensation, Super
Sonic
$34.99
$28
$26
DN-163A0
1 Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163A1
1 Amp, 6
Functions, Transponding, Back EMF
$34.99
$28
$26
DN-163A2
Fits
NEW Atlas GP-35 produced in 2006. This is a Plug & Play decoder.
$34.99
$28
$26
DN-163A3
Fits
NEW Atlas MP-15 switcher produced in 2006. This is a Plug & Play
decoder.
$29.99
$24
$23
DN-163I1A
Fits
Intermountain FT-A 1 Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163I1B
Fits
Intermountain FT-B 1 Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163I1C
Fits
Intermountain F3-A, F3-B, F7-A or F7-B 1 Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163IO
Fits
Intermountain SD-40T Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163K0a
1 Amp, 6 Functions,
Transponding, Back EMF
$34.99
$28
$26
DN-163K0b
Designed Specifically for the new Kato F7A&B post 2005
or F3A&B Amp,
6 Functions, Transponding, Back EMF
$34.99
$28
$26
DN-163K0D
Designed Specifically for the Kato F40PH 1 Amp,
6 Functions, Transponding, Back EMF
$35.99
$29
$27
DN-163K1C
1 Amp, 6
Functions, Transponding, Back EMF
$34.99
$28
$26
DN-163K2
1 Amp, 6
Functions, Transponding, Back EMF
$34.99
$28
$26
DN-163M0
MicroTrains
FT A&B 1 Amp, 6 Functions, Transponding,
Back EMF
$34.99
$28
$26
DN-143K2
Kato RDC 1
Amp, 2 Functions, Transponding, Back EMF
$44.99
$36
$33
MRC-1642
Fits Kato SD-40, C44-9, AC4400CW and some Athearn
Loco's.1 Amp
33.98
$27
$$26
Z14-SR
Z,
N
or HO Scale 1.3 Amps,
4 Functions
0.34 x 0.57 x 0.13 in
$34.95
$28
$26
N12SR
Micro
1 amp Silent Running Decoder, 2 Functions. Fits Z - N and HO
locomotives.
$29.95
$24
$23
N12A0
1 amp Silent Running
Decoder, 2 Functions. White LEDs
$29.95
$24
$23
NIMFT-A
Intermountain
FT-A Plug and Play Decoder from NCE
$29.95
$24
$23
NIMFT-B
Intermountain
FT-B Plug and Play Decoder from NCE
$29.95
$24
$23
DTK
DCC Decoder Tester
The decoder tester is designed to easily test most DCC decoders.
Suitable for all scales.
$24.95
$20
* Trans =
Transponding is a feature in some Digitrax decoders to
"Transmit" the decoder address over LocoNet to a computer.
This feature works in conjunction with the Digitrax BDL-168 (Block Detector),
a transponding circuit board (RX-4) for the BDL-168 and WinLoc,
RR&Co, JMRI Panel Pro, or other software.
** BEMF = Back Electromotive Force is a
decoder feature that is best described as "Cruse Control" for your
locomotive. When set with 3 separate CV's (Configuration Variables) your
locomotive will attempt to maintain the speed you have set on your throttle up
grades, down grades and on a flat surface.
* The columns marked Orange and Gray indicate
where to solder the decoder motor wires so the "Forward and Reverse"
indicator on you throttle will report the proper direction. T=Top,
B=Bottom, F=Fireman's Side and E=Engineers Side.
